An electrical Field Safety Representative (FSR) holds a BC certificate of qualification that lets them declare, on their employer's behalf, that regulated electrical work complies with the Safety Standards Act and its regulations. Most FSRs come from the electrician's trade: you need an electrician's trade certificate (Red Seal or BC), a recognized code course completed within the last three years, and electrical work experience after your trade certificate, one year (1,800 hours) for Class B or C and two years (3,600 hours) plus three documented high-voltage installations for Class A. Professional engineers and applied science technologists have their own routes. You apply to Technical Safety BC, which evaluates your qualifications, then you pass its 60-question exam with 70 per cent. A contractor's licence application names its FSR, and the contractor may work only within that FSR's class.
Try free BC FSR questionsGet all 550 – $69
01What does a Field Safety Representative do?
Under the Safety Standards General Regulation (SSGR s. 24), an FSR certificate entitles its holder to make declarations, on behalf of their employer, that regulated work complies with the Act and regulations, and only for work within the scope of their class. For work done under a permit, the FSR must (SSGR s. 26):
- make sure the work complies with every requirement under the Act;
- ask the regulatory authority for any inspections the Act or the permit requires;
- sign a declaration that the work complies, when permitted to;
- make sure the people doing the work are qualified for it;
- tell a safety officer about any regulated product or work they declare on that creates a risk of injury or property damage.
An FSR named on a contractor's licence or an operating permit also represents the contractor or permit holder on code, technical and worker-qualification matters within their class (SSGR s. 26(3)). In practice, every licensed electrical contractor in BC needs one.
02Which class do you need?
The Electrical Safety Regulation sets up three unrestricted classes (ESR s. 7). The class decides what you may declare:
| Class | What you may declare |
|---|---|
| A | Any type of electrical work, with no voltage or ampere limit. |
| B | Installations whose completed voltage does not exceed 1 000 volts. TSBC's Class B page adds the underground raceway scope: underground conduit installations at any voltage. |
| C | Single-phase installations of 200 amps or less and 150 volts or less to ground. |
Someone who qualifies for Class A may take a Class B or C certificate instead, but may hold only one of those at a time (ESR s. 8(3)). TSBC also offers restricted classes for narrower work, such as Power Line Technician, Refrigeration, Full or Limited Entertainment, Low Energy, Security Alarm, Instrument Mechanic, Underground Raceway and Water Well, each with its own shorter exam. This page covers Classes A, B and C.
03Who may write the FSR exam?
The regulation names three groups who may apply (ESR s. 6): holders of an appropriate trade certificate or recognized training under ESR s. 4(1)(a) to (c), applied science technologists (s. 9) and professional engineers (s. 10). TSBC's class pages set out what it accepts for each.
Electricians. You need all of the following:
- an electrician's trade credential: an interprovincial Red Seal electrician certificate, a BC trade qualification in electrical work (construction or industrial), or a BC exemption permit in the trade (EWX);
- relevant electrical work experience under the Canadian Electrical Code, gained after your trade certificate: one year (1,800 hours) for Class B or C, two years (3,600 hours) for Class A;
- proof of a recognized course in the application of electrical codes and standards, completed within three years of your application;
- for Class A only, at least three documented high-voltage installations since you got your trade certificate (ESR s. 8(2)). TSBC says an HV training course may count toward this, and where a current Class A FSR cannot verify the experience, a sworn affidavit or statutory declaration is required.
Professional engineers need an electrical engineering degree, acceptable experience using the CEC and good standing with Engineers and Geoscientists BC; for Class A or B the regulation asks for two years of acceptable experience (ESR s. 10). Applied science technologists need an electrical engineering technology (power option) qualification and registration as an AScT; for Class A or B the regulation asks for two years after a Class C certificate or three years on installations over 150 volts to ground, and for Class C one year (ESR s. 9). Both still pass the exam.
04The recognized code course
Every electrician applying for Class A, B or C must complete a course in the application of electrical codes and standards that TSBC recognizes (ESR s. 8(1)(b)), within three years of the application date. TSBC publishes a list of recognized training providers on its site; check that list before you enrol, since a course that is not on it will not count.
The course is a requirement, not a substitute for practice under time. Its job is to take you through the code; the exam asks you to apply the code and the legislation, open book, at about three and a half minutes a question.
05How to apply and book the exam
- Open an Online Services account with TSBC and choose "Apply for a new certificate" for your class. Paper forms are available on request.
- Pay the evaluation fee ($340 plus GST in 2026, $357 from January 1, 2027; non-refundable). TSBC reviews your trade certificate, experience and course.
- Wait for approval. You cannot book the exam until TSBC tells you that you are eligible.
- Book the exam in your account under "Book or view exams": in person at a TSBC office ($193 plus GST in 2026) or online with remote proctoring ($183).
- Finish within three years. An application still incomplete three years after it was created is closed, and its fees are forfeited.
If you hold both an FSR Class A, B or C certificate and an electrician's trade credential, you can ask at the same time for TSBC's BC Master Electrician designation, or add it when you renew. It does not change your class or your renewal requirements.
06The exam itself
Classes A, B and C each write 60 multiple-choice questions in 3.5 hours, open book, with a 35 per cent focus on the Act, Regulations and Directives and 65 per cent on the Code, and 70 per cent to pass. Class B and C candidates are examined on the whole CEC except Section 36; Class A on all sections plus CSA C22.3 No. 1, Overhead Systems. You have three attempts, a 30-day wait after a fail, and a new exam fee for each rewrite.
The BC FSR exam guide has the full detail: what you may bring, what TSBC supplies online, the fee table and how to study.
07How a contractor names an FSR
Under the Safety Standards Act (s. 23), a person must be licensed to manage or direct people doing regulated work, or to do regulated work for someone who is not a licensed contractor. The FSR is how that licence is tied to a qualified person:
- The licence application names the FSR. Unless the discipline's regulation exempts it, an application for a contractor's licence must give an FSR's name, certificate number and class (SSGR s. 6(a)).
- The FSR's class caps the contractor. A licensed contractor must not do regulated work beyond the qualifications of the FSR named on its licence, and must not let anyone unqualified do the work it is responsible for (SSGR s. 7).
- Changes are reported at once. The contractor must notify a provincial safety manager immediately when its named FSR stops being employed, and when a replacement is hired, with the new FSR's name and certificate number (SSGR s. 9).
- Permits name the FSR too. An installation permit application must name the FSR, with certificate number and class, unless exempted (SSGR s. 17(3)), and a permit holder may not work beyond that FSR's qualifications (SSGR s. 16). For electrical maintenance under an operating permit, the application must name the FSR who will do or supervise the work (ESR s. 14), and the permit holder must report it at once if that FSR leaves (SSGR s. 19).
The certificate has to stay current for all of this to work. TSBC's renewal page warns that if the primary FSR on a contractor licence lets the certificate expire, the licence is put on hold along with its installation and operating permits, and the FSR cannot be named on new permits or licences.
08Keeping the certificate
FSR certificates are renewed every three years. For Classes A, B and C you complete at least 8 hours of continuing education within the term, with a recognized training provider and on the 2024 code, or pass an examination (ESR s. 10.1). The renewal fee is $128 plus GST in 2026 ($134 from 2027), you may renew up to a year early, and late renewal costs extra. A certificate left expired for three years is closed: you would apply again and rewrite the exam.
09Coming from outside BC
Electrical qualifications from another province do not carry over on their own: TSBC says you still need a BC certificate to work as an FSR here, through the same eligibility rules and exam, with an interprovincial Red Seal electrician certificate standing in for BC trade credentials.
Alberta master electricians have a separate route. TSBC treats an active Alberta Master Electrician certificate as equivalent to a Class A FSR with the BC Master Electrician designation, provided you pass an exam on BC's Acts, Regulations and Directives only: open book, multiple choice, 2.5 hours, 70 per cent to pass. If you are still working toward the Alberta certificate, see our Alberta Master Electrician practice test.
10How to prepare
Start the code course early enough that it is less than three years old when you apply, and use the evaluation wait to practise. A third of the exam is the Safety Standards Act, the General Regulation, the Electrical Safety Regulation and TSBC's directives, so practise finding the right section quickly, not only the code.
Our BC FSR practice exam has five free sample questions, and the free BC FSR questions page ten more. The full bank is 550 original questions with timed 60-question mocks in 3.5 hours.
11Questions people ask
- How long does it take to become an FSR in BC?
- For an electrician, at least one year (1,800 hours) of electrical work after your trade certificate for Class B or C, or two years (3,600 hours) plus three documented high-voltage installations for Class A, together with a recognized code course taken within three years of applying. Then TSBC evaluates your application and you pass the exam.
- Do I need a Red Seal to become an FSR?
- An electrician needs an electrician's trade credential: TSBC accepts an interprovincial Red Seal electrician certificate, a BC trade qualification in electrical work, or a BC exemption permit in the trade. Professional engineers and applied science technologists qualify by their own routes instead.
- What is the difference between FSR Class A, B and C?
- Class A may declare any electrical work. Class B covers installations up to 1 000 volts, plus underground raceway at any voltage. Class C covers single-phase installations of 200 amps or less and 150 volts or less to ground.
- Does an electrical contractor need an FSR?
- Yes. An application for a contractor's licence must name a Field Safety Representative, and the contractor may not do regulated work beyond that FSR's class (Safety Standards General Regulation ss. 6 and 7).
- How often is an FSR certificate renewed?
- Every three years. Class A, B and C holders complete at least 8 hours of continuing education within the term, or pass an examination, under section 10.1 of the Electrical Safety Regulation.
12Sources
- Electrical Safety Regulation, B.C. Reg. 100/2004 (BC Laws): ss. 4, 6 to 10.1 and 14: who may do electrical work, who may apply, the classes, requirements, renewal and operating permits. Accessed November 10, 2026.
- Safety Standards General Regulation, B.C. Reg. 105/2004 (BC Laws): ss. 6, 7, 9, 16 to 19 and 23 to 26: contractor licences, permits and the FSR's duties. Accessed November 10, 2026.
- Safety Standards Act, SBC 2003, c. 39 (BC Laws): s. 23, licensing of contractors. Accessed November 10, 2026.
- Technical Safety BC: Class A Electrical FSR Certification: eligibility by profession, high-voltage documentation, application steps. Accessed November 10, 2026.
- Technical Safety BC: Class B Electrical FSR Certification: scope including underground raceway, eligibility, the exam. Accessed November 10, 2026.
- Technical Safety BC: Class C Electrical FSR Certification: scope and eligibility. Accessed November 10, 2026.
- Technical Safety BC: FSR certification renewal: continuing education, the effect of an expired certificate on a contractor licence, certificate closure. Accessed November 10, 2026.
- Technical Safety BC: Transfer to BC: out-of-province electricians and the Alberta Master Electrician route. Accessed November 10, 2026.
- Technical Safety BC: Electrical Fee Schedule (PDF, updated January 9, 2026): evaluation, exam and renewal fees for 2026 and 2027. Accessed November 10, 2026.
The legislation was read on BC Laws and the certification rules on Technical Safety BC's pages on November 10, 2026. The statutes and regulations are paraphrased and cited by section; no TSBC or CSA text is reproduced. TSBC is the final word on eligibility and the exam; if you find something here out of date, tell us.
Related: BC FSR practice exam · BC FSR exam guide · Free BC FSR practice questions · 309A Construction Electrician (Red Seal) practice exam · All guides
13Practice for this exam
TicketPrep's BC FSR practice exams cover the Acts, Regulations and Directives and the BC Electrical Code in four units, with every answer explained and timed 60-question mocks in 3.5 hours scored against the 70 per cent pass mark. You can try five sample questions with no account. The BC FSR Exam Pass is $69 one time for 120 days, and All-Access at $119 includes it along with every other exam on the site.
Ten free questions per trade, no account: free practice questions. How our questions are written and checked: how our questions are made.