The BC FSR exam is the certification exam for an electrical Field Safety Representative, the person who declares on a contractor's behalf that regulated electrical work complies with BC's safety law. Technical Safety BC (TSBC) sets and delivers it. Classes A, B and C share one format: 60 multiple-choice questions in 3.5 hours, open book, with a 35 per cent focus on the Act, Regulations and Directives and a 65 per cent focus on the Code, and 70 per cent to pass. You bring your own Canadian Electrical Code; TSBC supplies online links to the legislation and its directives and bulletins during the exam. The classes differ in what you may declare and in one part of the code: Class A adds Section 36 and CSA C22.3 No. 1. In 2026 the evaluation fee is $340 and the exam $193 in person or $183 online, plus GST.
Try free BC FSR questionsGet all 550 – $69
01What is the BC FSR exam?
A Field Safety Representative (FSR) holds a certificate of qualification that lets them, on behalf of their employer, make declarations that regulated work complies with the Safety Standards Act and its regulations (Safety Standards General Regulation s. 24). An electrical contractor's licence application names an FSR, and the contractor may not do regulated work beyond that FSR's qualifications (SSGR ss. 6 and 7). The Electrical Safety Regulation sets up three classes, A, B and C (ESR s. 7), and to get one an electrician must, among other things, pass an examination (ESR s. 8).
That examination is the BC FSR exam. Technical Safety BC sets it and delivers it, in person at its offices or online. The certificate is a BC credential under the Safety Standards Act; it builds on an electrician's trade certificate rather than replacing it. For the eligibility rules and how a contractor names an FSR, read how to become a Field Safety Representative in BC.
02What is the FSR exam format?
TSBC's Class B page gives the format, and the Class A and Class C pages give the same one:
- 60 multiple-choice questions;
- 3.5 hours (210 minutes) to write;
- open book: you bring your own code book, and TSBC supplies the legislation online (see below);
- a 35 per cent focus on the Act, Regulations and Directives and a 65 per cent focus on the Code;
- a minimum grade of 70 per cent to pass.
TSBC publishes no finer weighting than the 35 / 65 split, and no sample questions. On 60 questions the split comes to about 21 legislation and 39 code questions; that is our arithmetic, not a TSBC figure. The restricted classes, such as Power Line Technician, Refrigeration or Low Energy, have their own shorter exams of 40 or 50 questions on a listed set of code sections; this guide covers only the unrestricted Classes A, B and C.
03How do Classes A, B and C differ on the exam?
The three classes share the format, the split and the legislation. They differ in what the certificate lets you declare and in the code you are examined on:
| Class | May declare (ESR s. 7, TSBC class pages) | Code on the exam (TSBC study materials) |
|---|---|---|
| A | any type of regulated electrical work, no voltage or ampere limit | CEC Part I, all sections, and CSA C22.3 No. 1, Overhead Systems |
| B | installations up to 1 000 volts, and underground raceway at any voltage | CEC Part I except Section 36 |
| C | single-phase installations of 200 amps or less and 150 volts or less to ground | CEC Part I except Section 36 |
So Class B and Class C candidates study the same code, and Class A adds high voltage: Section 36 of the CEC and the overhead-systems standard. Class B is the class most candidates search for.
04What do the four units cover?
TSBC does not divide the exam into units. The four below are ours, two for each side of its 35 / 65 split, and the question counts are from our 60-question mock, not TSBC figures. The summaries are our own reading of the legislation and the code.
Unit A: Safety Standards Act and General Regulation
9 questions in our mock. The scope and definitions of the Act, licensed contractors and certificates of qualification, the FSR's duties under Part 5 of the General Regulation, permissions, permits, inspections and documents, directives, safety orders, variances and incidents, and enforcement: compliance orders, monetary penalties, review and appeal, and offences.
Free unit A practice questions: Safety Standards Act and General Regulation →
Unit B: Electrical Safety Regulation, Directives and Bulletins
12 questions. Who may do regulated electrical work (ESR s. 4), the FSR classes and certificates, installation, homeowner and operating permits, declarations and inspection requests, regulated products and approval marks, and emergencies, incidents, utilities and recreational vehicles, read with TSBC's active electrical directives and information bulletins.
Free unit B practice questions: Electrical Safety Regulation, Directives and Bulletins →
Unit C: BC Electrical Code Rules
18 questions. The non-calculation rules of the CEC as BC's code: Sections 0 and 2, conductors and services, grounding and bonding, wiring methods, protection and control, Section 26 installations, hazardous locations, motors and the special sections, each read with the BC directives that interpret them.
Free unit C practice questions: BC Electrical Code Rules →
Unit D: BC Electrical Code Calculations
21 questions. Dwelling, row-housing and apartment loads with EV charging and load management, non-dwelling, add-load and RV park loads, ampacity and correction factors, voltage drop, conduit and box fill, motors, welders and compressors, transformers and taps, and bonding conductors and fault current.
Free unit D practice questions: BC Electrical Code Calculations →
05What extra does Class A need?
Section 36 of the CEC, on high-voltage installations, and CSA C22.3 No. 1, Overhead Systems, which Class A candidates must bring to the exam with its updates. TSBC's high-voltage directive applies to Section 36 work as well.
Our bank has a separate Class A skill set of 30 questions on Section 36 and the high-voltage directive, kept out of the 60-question mock so that Class B and C candidates are not drilled on work their exam leaves out. It has no questions on CSA C22.3 No. 1, so it does not cover the whole Class A exam; plan to study the overhead-systems standard from the book itself.
06What may you bring, and what does TSBC supply?
The exam is open book, with rules. TSBC's reference material list and permitted reference materials page say, in short:
- You bring the code. The current Canadian Electrical Code Part I, and for Class A also CSA C22.3 No. 1 with its updates.
- TSBC supplies the legislation. During electrical exams it provides online links to the Safety Standards Act, the Safety Standards General Regulation, the Electrical Safety Regulation, and its safety orders, directives and information bulletins. You may bring your own paper copies as well.
- Markings are limited. Tabs, highlighting and cross-reference notes are allowed; pages with written formulas, worked examples or calculations must come out, and no extra sheets may be inserted. Sticky notes used as tabs are on TSBC's list of prohibited items.
- Two books are banned. The CEC Handbook and the CEC Pocket Reference are not allowed.
- A non-programmable calculator, which you bring yourself; programmable calculators are not allowed.
Because the directives and bulletins are supplied, they are fair game. They are also where BC's own readings of the code live: the 2024 code was adopted with no deviations, so the BC differences come through TSBC's directives.
07How do you apply, and what does it cost?
You apply for the certificate first, in your TSBC Online Services account, and pay a non-refundable evaluation fee. TSBC reviews your qualifications and tells you when you may book the exam; only then can you choose a date, time and location. You have three years from the date your application is created to complete it, or it is closed and the fees are forfeited.
The fees on TSBC's electrical fee schedule (updated January 9, 2026), plus GST:
| Fee | From Jan 1, 2026 | From Jan 1, 2027 |
|---|---|---|
| Evaluation of qualifications (non-refundable) | $340 | $357 |
| Exam, digital, in person | $193 | $203 |
| Exam, digital, remote | $183 | $192 |
| Exam re-marking | $84 | $88 |
| FSR certificate renewal | $128 | $134 |
The exam fee is set by the date you write, not the date you applied, and a rewrite is booked and paid as a new exam. TSBC gives no refund once an exam is booked, though you may rebook for free before the cancellation cut-off in your booking confirmation.
08In person or online: what is the exam day like?
In person. TSBC lists exam locations in Vancouver, Langley, Kelowna, Fort St. John, Prince George, Victoria and Kamloops. Arrive 30 minutes early with valid, current, government-issued photo ID; late arrivals get no extra time. For a computer exam TSBC supplies scrap paper and an access code. Phones, watches and other devices that store or send data, programmable calculators, inserted pages and crib sheets stay out of the room.
Online. TSBC's online exams are monitored with ProctorTrack. You need a desktop or laptop (not a tablet or Chromebook), a webcam, a built-in microphone, a reliable connection and a smartphone for the ID and room scan, which is then put away. You may use two blank sheets of paper, a pen and a non-programmable calculator. TSBC says online rewrites often come from setup problems: missing software, unacceptable ID, or ending the session before its video has uploaded.
Results come by portal notification, email or mail. TSBC says a breach of the exam rules may void your result and bar you from exams for six months.
09What happens if you fail?
You have three chances to pass. After each attempt TSBC sends a notification letter with the marks you got and the areas that need improvement. After a fail you wait 30 days before you rebook, and each further attempt carries the exam fee again. If you fail a third time, you must ask TSBC's permission for a fourth attempt, with more time required between attempts.
Use the letter. It points at the areas that cost you marks, and with a single 70 per cent pass mark across the paper, a weak legislation score can sink an otherwise strong code result.
10Which code edition is tested?
The Canadian Electrical Code, Part I, 26th edition (CSA C22.1:24), which BC adopted as the BC Electrical Code effective March 4, 2025, through section 20 of the Electrical Safety Regulation and its Schedule. TSBC's information bulletin IB-EL 2024-01 says there are no deviations from the national code this cycle; the Schedule still redefines a few terms, such as electrical contractor. Bring the 2024 edition.
The CEC is a CSA Group publication: its rules, tables and definitions may not be reproduced without permission, so this page and our questions cite rule numbers and explain requirements in our own words. BC's statutes and regulations are public on BC Laws; we paraphrase them and cite the section.
11How long does the certificate last?
An FSR certificate is renewed every three years. For Classes A, B and C, the Electrical Safety Regulation (s. 10.1) requires at least 8 hours of continuing education within the term, or passing an examination; TSBC's renewal page says the course must be with a recognized training provider and on the 2024 code. You may renew up to a year before expiry, and late renewal carries a fee. A certificate that has been expired for three years is closed, and getting it back means applying again and passing the exam.
12How should you study for the FSR exam?
Split your time the way the paper is split, and do not leave the legislation to the end.
- Learn the Act and regulations by section. Who may do regulated work, who needs a licence, what an FSR must do under a permit, what a safety officer may order: a third of the paper, and the part most code courses spend least time on. With the texts supplied online, knowing which section to open is most of the answer.
- Read the directives with the code. BC's directives change how some rules apply here, from service disconnects to Section 26 receptacles.
- Drill the calculations. Dwelling and apartment loads, EV charging, ampacity with correction factors, voltage drop and motors: each one is a single question, and each one takes time.
- Tab your code book now. You will use it for every code question; tab the sections and tables you reach for most.
- Time a full paper. Work at least one 60-question set in 3.5 hours, with only what the exam allows beside you, and check your score on each unit as well as the total.
13How does TicketPrep's BC FSR practice exam work?
Our bank has 550 original questions, 400 Standard and 150 Advanced: four units on the legislation and the code, plus the 30-question Class A skill set. Every question has four options and one correct answer, and explains all four. None is a recalled or shared exam question: TSBC publishes no questions, and our bank is written from public sources only.
The timed mock exam is 60 questions in 3.5 hours, drawn 9, 12, 18 and 21 from units A to D, which is 21 legislation and 39 code questions. The unit split is ours, because TSBC publishes only the 35 / 65 split. Each mock is scored against the 70 per cent pass mark and shows your score on each unit.
You can try five questions free on the BC FSR practice exam page and read ten more on the free BC FSR questions page, with eight more on each unit page linked above.
14Questions people ask
- How many questions are on the BC FSR exam?
- Sixty multiple-choice questions in 3.5 hours for Classes A, B and C, open book, according to Technical Safety BC's class pages. You need 70 per cent to pass.
- What is the FSR exam split?
- TSBC says each Class A, B and C exam has a 35 per cent focus on the Act, Regulations and Directives and a 65 per cent focus on the Code. On 60 questions that is about 21 and 39. TSBC publishes no finer weighting.
- Is the FSR exam open book?
- Yes. You bring your own current Canadian Electrical Code Part I, and Class A candidates also bring CSA C22.3 No. 1. TSBC supplies online links to the Safety Standards Act, the Safety Standards General Regulation, the Electrical Safety Regulation and its directives and bulletins. The CEC Handbook and Pocket Reference are not allowed.
- What is the difference between the FSR Class B and Class C exams?
- The exam itself: both are 60 questions in 3.5 hours on the legislation and the whole CEC except Section 36. The difference is what you may declare: Class B covers installations up to 1 000 volts, Class C single-phase installations of 200 amps or less and 150 volts or less to ground.
- How much does the FSR exam cost?
- On TSBC's fee schedule, 2026 fees are a $340 evaluation fee and a $193 exam in person or $183 online, plus GST. From January 1, 2027 they are $357, $203 and $192. Each rewrite is a new exam fee.
- Can I write the FSR exam online?
- Yes. TSBC offers remotely proctored online exams through ProctorTrack, on a desktop or laptop with a webcam, as well as in-person exams at its offices.
15Sources
- Technical Safety BC: Class A Electrical FSR Certification: scope, eligibility, exam format and study materials (all CEC sections). Accessed November 10, 2026.
- Technical Safety BC: Class B Electrical FSR Certification: scope, eligibility, the 60-question format, the 35 / 65 split, the 70 per cent pass mark, attempts and study materials (CEC except Section 36). Accessed November 10, 2026.
- Technical Safety BC: Class C Electrical FSR Certification: scope, eligibility and exam format. Accessed November 10, 2026.
- Technical Safety BC: Electrical Examination Reference Material List: open-book rules, the reference list and the banned Handbook and Pocket Reference. Accessed November 10, 2026.
- Technical Safety BC: Permitted reference materials: the legislation, directives and bulletins supplied online during electrical exams. Accessed November 10, 2026.
- Technical Safety BC: Electrical FSR exam information: locations, booking, identification, materials, prohibited items, rewrites and exam policies. Accessed November 10, 2026.
- Technical Safety BC: Online exams: ProctorTrack, equipment and permitted items. Accessed November 10, 2026.
- Technical Safety BC: Electrical Fee Schedule (PDF, updated January 9, 2026): evaluation, exam, re-marking and renewal fees for 2026 and 2027. Accessed November 10, 2026.
- Technical Safety BC: FSR certification renewal: the three-year term, continuing education and certificate closure. Accessed November 10, 2026.
- Technical Safety BC: IB-EL 2024-01, Adoption of BC Electrical Code, 2024 Edition: the 2024 code in effect March 4, 2025, with no deviations. Accessed November 10, 2026.
- Electrical Safety Regulation, B.C. Reg. 100/2004 (BC Laws): ss. 4, 6 to 10.1 and 20. Accessed November 10, 2026.
- Safety Standards General Regulation, B.C. Reg. 105/2004 (BC Laws): ss. 6, 7 and 24. Accessed November 10, 2026.
The exam rules were read on Technical Safety BC's pages and fee schedule, and the legislation on BC Laws, on November 10, 2026. Where TSBC does not state something, such as a weighting finer than 35 / 65, we say so instead of filling it in. The unit summaries are our own reading; no CSA, TSBC or statute text is reproduced here beyond a few words. TSBC is the final word on its exam; if you find something here out of date, tell us.
Related: BC FSR practice exam · Free BC FSR practice questions · How to become a Field Safety Representative in BC · Alberta Master Electrician exam guide · All guides
16Practice for this exam
TicketPrep's BC FSR practice exams cover the Acts, Regulations and Directives and the BC Electrical Code in four units, every answer is explained, all four options, and every timed mock is 60 questions in 3.5 hours scored against the 70 per cent pass mark. You can try five sample questions with no account. The BC FSR Exam Pass is $69 one time for 120 days, and All-Access at $119 includes it along with every other exam on the site.
Ten free questions per trade, no account: free practice questions. How our questions are written and checked: how our questions are made.